How to clean Oticon hearing aids: domes, wax filters, and daily care

Regular cleaning of Oticon hearing aids is essential to maintaining sound quality, device hygiene, and long-term performance. Whether you’re new to hearing aids or need a quick refresher, this guide explains how to clean Oticon hearing aids, including specific instructions for domes and wax filters. A consistent cleaning routine can prevent malfunctions caused by earwax, moisture, and other bacteria.

How to clean Oticon hearing aids

Cleaning Oticon hearing aids should become part of your daily routine. A quick wipe-down each evening is often enough to keep your devices in good condition.

Daily steps for general cleaning:

  • Remove the hearing aids and wipe them down with a soft, dry cloth or cleaning wipe designed for hearing aids.

  • Check the microphone openings and speaker area for visible wax or dirt.

  • If moisture is present, store the hearing aids in a drying container or electronic drying box overnight.

Do not use water, alcohol, or household cleaning products, as these may damage the electronic components.

How to clean Oticon hearing aid domes

A dome is the soft silicone tip that sits inside your ear canal. It can easily collect wax, which may block sound output if not cleaned regularly. Here’s how to clean Oticon hearing aid domes properly:

  1. Gently remove the dome from the receiver by pulling it straight off. Avoid twisting.

  2. Wipe the dome with a dry, lint-free cloth or a dedicated hearing aid cleaning wipe.

  3. Inspect for wax build-up. If the dome appears discolored, torn, or overly blocked, replace it.

  4. Reattach the dome by pressing it firmly back onto the receiver until it clicks into place.

Domes should be cleaned daily and replaced every 4 weeks or as recommended by your hearing care professional.

How to clean Oticon wax filters

Wax filters are essential for protecting the receiver from earwax and moisture. If your hearing aid volume is lower than usual or sound is distorted, the filter may be clogged. Here’s how to clean Oticon wax filters, or more accurately, how to replace them:

  1. Remove the dome to expose the wax filter.

  2. Use the tool provided in your Oticon wax filter kit, which typically has two ends: one for removal and one with a fresh filter.

  3. Insert the removal tip into the used filter and pull it out.

  4. Flip the tool and insert the new filter into the same opening.

  5. Discard the used tool after replacing the filter and reattach